Device Management
Every collection task depends on the device inventory. Data assets need to answer "which device recorded this?", so each collection task must be bound to a specific registered device.
Where: Device Management → Device List in the left navigation.
Model and Serial Number
| Field | Purpose | Example |
|---|---|---|
| Device model | Identifies the type of device, which determines the storage format and the downstream curation path | Station Lite |
| Device name | An editable name that makes the device easy to identify on site | Station Lite-01 |
| Device SN | Identifies the individual unit; cannot be changed after registration | ST-2609-0001 |
The device column in the asset and task lists shows model · name · SN, so you can trace any batch of data back to the exact machine by SN.
Supported Models
| Model | Category | Form factor | Storage format | Curation path |
|---|---|---|---|---|
| Station Lite | Robot-based | Dual-arm tabletop | HDF5 | Curate directly |
| MOS | Robot-based | Wheeled dual-arm | HDF5 | Curate directly |
| Robot-free Ego | Robot-free | First-person stereo | RAW | Pipeline required first |
| Robot-free UMI | Robot-free | Handheld capture | RAW | Pipeline required first |
Registering a Device
- Go to Device Management → Device List and click Add Device.
- Select the device model.
- Enter a device name.
- Enter the device SN. The SN is usually printed on the device nameplate. Network-connected devices also report their SN automatically once they connect, so you can add them directly from the Pending Registration list.
- For robot-based devices, also enter the associated teleoperation device ID. Devices without one cannot run collection tasks.
- Click OK. The device is added to the inventory with an initial status of Offline, which changes to Online after its first heartbeat.
Search by the last four digits
The SN search box in the device list accepts just the last four characters of the SN.
Device States
| State | Meaning | Selectable for collection tasks? |
|---|---|---|
| Online | Heartbeat is normal | ✓ |
| In Use | Currently running a task | ✓ (shows the number of bound tasks) |
| Offline | No heartbeat within the expected interval | Grayed out |
| Under Maintenance | Manually set by an administrator or FAE | Grayed out |
| Decommissioned | No longer in service | Grayed out |
Connected devices send a heartbeat every 30 seconds. If three consecutive heartbeats are missed (about 90 seconds), the platform marks the device Offline.
Devices and Collection Tasks
- A device can be bound to multiple open tasks. When you select a device, it shows "Bound to N open tasks" so you can tell whether it is already committed. On-site scheduling is coordinated by the collection lead.
- If the device list is empty after you select a model, no devices of that model are registered. Task creation is blocked, and the page offers Register Device and Go to Device Management.
- Virtual devices are not supported. Unregistered devices can't produce real data, and their data couldn't be traced back to a source.

